FORKLIFT Technical parameters of QN-100A type excavator:
1. Electro-hydraulic system with full-rotation and air-conditioning, National 3 Yunnei engine 4102 high-pressure common rail, maximum 100 horsepower, four-wheel drive automatic transmission, hydraulic traveling at high and low two speeds, 2 forwards and 2 retreats, parking brakes.
2. Tires 20.5/70-16, wheel-side reduction bridge, wheel spoke distance of 2.4 meters, wheelbase of about 2.2 meters, speed less than 32km/h, and climbing ability less than or equal to 25%.
3. The digging depth is about 2 meters, the unloading height is 6.55 meters, and the load weight is ≤500kg.
4. ThreeForklift
Technical parameters of QN-100A type excavator:
1. Electro-hydraulic system with full-rotation and air-conditioning, National 3 Yunnei engine 4102 high-pressure common rail, maximum 100 horsepower, four-wheel drive automatic transmission, hydraulic traveling at high and low two speeds, 2 forwards and 2 retreats, parking brakes.
2. Tires 20.5/70-16, wheel-side reduction bridge, wheel spoke distance of 2.4 meters, wheelbase of about 2.2 meters, speed less than 32km/h, and climbing ability less than or equal to 25%.
3. The digging depth is about 2 meters, the unloading height is 6.55 meters, and the load weight is ≤500kg.
4. Three-pump system, 7-link combined chip multi-way valve, hydraulic pilot for working device, electronic pilot for attachment, compound action operation.
5. The weight of the whole machine is 5.5t, and its length, width and height are 4500mmx2400mm2800mm. Optional front support leg (optional).
6. Optional wooden gripping clamp, the gripper opening is 1.2 meters. Load 500 kg.
7. Purchase accessories. Optional bucket, bucket, grab (grab sugar cane, grab logs, etc.), fork needle (fork grass, fork cotton), feller, breaker, auger, rammer, hydraulic saw, telegraph pole Machine and so on
-pump system, 7-link combined chip multi-way valve, hydraulic pilot for working device, electronic pilot for attachment, compound action operation.
5. The weight of the whole machine is 5.5t, and its length, width and height are 4500mmx2400mm2800mm. Optional front support leg (optional).
6. Optional wooden gripping clamp, the gripper opening is 1.2 meters. Load 500 kg.
7. Purchase accessories. Optional bucket, bucket, grab (grab sugar cane, grab logs, etc.), fork needle (fork grass, fork cotton), feller, breaker, auger, rammer, hydraulic saw, telegraph pole Machine and so on
